Enabling And Configuring Wireless Security (No Wps) - ZyXEL Communications WAP5605 User Manual

7.4 Enabling and Configuring Wireless Security (No WPS)

This example shows you how to configure wireless security settings with the following parameters
on your WAP5605.
SSID
Channel
Security
Follow the steps below to configure the wireless settings on your WAP5605.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
Open the Wireless LAN > General screen in the AP's Web Configurator.
1
Enter SSID_Example3 as the SSID and select a channel or select Auto Channel Selection to
2
have the WAP5605 scans for and select an available channel automatically. Click Apply.
Figure 35 Tutorial: Network > Wireless LAN > General
Click the Security tab.
3
WAP5605 User's Guide
SSID_Example3
Auto
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
Chapter 7 Tutorials
Section 6.2 on page 49).
59