Adding A New Wlan Profile - ZyXEL Communications WAP5605 User Manual

Chapter 5 Client Mode

5.6.1 Adding a New WLAN Profile

Use this screen to create a new wireless LAN profile for your WAP5605. Click the Add button in the
Configuration > Network > Wireless LAN > Profile screen to open the following screen.
Figure 20 Client Mode: WLAN > Profile > Add
The following table describes the labels in this screen.
Table 12 Client Mode: WLAN > Profile > Add
LABEL
Wireless Setup
Profile Name
Network Name
(SSID)
Site Survey
Security
Security Mode
Apply
Back
5.6.1.1 No Security
Use this screen if the access point to which you want to connect does not use encryption.
Figure 21 Client Mode: WLAN > Profile: No Security
42
DESCRIPTION
Enter a descriptive name for this profile.
Enter the name of the access point to which you are connecting.
Click this button to go to the Site Survey screen and see available wireless devices
within range.
Select the security mode of the access point to which you want to connect.
Click Apply to save your changes back to the WAP5605.
Click Back to go back to the previous screen.
WAP5605 User's Guide