Enter a descriptive profile name and the SSID and security settings of the wireless device to which
2
you want to connect. Click Apply.
The new profile entry displays in the Profile screen. To enable a profile, select the corresponding
3
radio button and click Activate. The green check icon means this profile is active and the WAP5605
is associating with the specified wireless network.
7.6.3 Deploying the WAP5605 in your Network
After you finish configuring the operating mode and wireless settings on the WAP5605, disconnect
1
the computer from the WAP5605 and change its TCP/IP settings back to the previous ones.
Connect a device to the WAP5605, which you want to use to access the AP or wireless router
2
through the WAP5605. Make sure the device is set to obtain an IP address automatically.
WAP5605 User's Guide
Chapter 7 Tutorials
67