Setting Your Wap5605 To Client Mode - ZyXEL Communications WAP5605 User Manual

Chapter 5 Client Mode

5.4 Setting your WAP5605 to Client Mode

To set your WAP5605 to client mode, see
1
Connect your computer to the LAN port of the WAP5605.
2
The default IP address of the WAP5605 in client mode is "192.168.1.10". In this case, your
3
computer must have an IP address in the range between "192.168.1.11" and "192.168.1.254".
Click Start > Run on your computer in Windows. Type "cmd" in the dialog box. Enter "ipconfig" to
4
show your computer's IP address. If your computer's IP address is not in the correct range then see
Appendix C on page 135
After you've set your computer's IP address, open a web browser such as Internet Explorer and
5
type "http://192.168.1.10" as the web address in your web browser.
Enter "1234" (default) as the password and click Login.
6
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
7
The Easy mode appears. Click Expert Mode in the navigation panel.
8
38
Section 2.1.2.1 on page
for information on changing your computer's IP address.
21.
WAP5605 User's Guide