Log Settings - ZyXEL Communications WAP5605 User Manual

Chapter 8 Monitor
Click Monitor > Log.
Figure 38 Monitor > Log
The following table describes the labels in this screen.
Table 23 Monitor > Log
LABEL
Display
#
Time
Message
Refresh
Clear

8.4 Log Settings

Use the Log Settings screen to choose which categories of events and/or alerts the WAP5605 is to
log and then display the logs. To change your WAP5605's log settings, click Monitor > Log > Log
Settings. The screen appears as shown.
Figure 39 Monitor > Log > Log Settings
72
DESCRIPTION
Select a category of logs to view. Select all log to view logs from all of the log
categories that you selected in the Log Settings screen.
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
This field states the reason for the log.
Click Refresh to renew the log screen.
Click Clear to delete all the logs.
WAP5605 User's Guide