Product Specifications - ZyXEL Communications WAP5605 User Manual

The following tables summarize the WAP5605's hardware and firmware features.
Table 44 Hardware Features
Dimensions (W x H x D)
Weight
Power Specification
Two Ethernet ports
Reset Button
WPS button
Antennas
Operation Environment
Storage Environment
Screw size for wall-
mounting
Table 45 Firmware Features
FEATURE
Default IP Address
Default Subnet Mask
Default Password
Wireless Interface
Default Wireless SSID
Device Management
WAP5605 User's Guide
C
HAPTER

Product Specifications

109.96 mm x 155.8 mm x 30.7 mm
245 g
Input: 100~240 V AC, 50~60 Hz
Output: 12 V DC 1A
Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
The reset button is built into the rear panel. Use this button to restore the
WAP5605 to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
Press the WPS on two WPS enabled devices within 120 seconds for a
security-enabled wireless connection.
The WAP5605 is equipped with four 3dBi (5 GHz) internal antennas to
provide clear radio transmission and reception on the wireless network.
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 20% ~ 90%
Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 20% ~ 95%
M4*0.7 mm
DESCRIPTION
AP mode: 192.168.1.2
Client mode: 192.168.1.10
255.255.255.0 (24 bits)
1234
Wireless LAN
ZyXEL+(the last six characters of the WAP5605's MAC address)
Use the Web Configurator to easily configure the rich range of features
on the WAP5605.
1 3
107