ZyXEL Communications WAP5605 User Manual page 108

Chapter 13 Product Specifications
Table 45 Firmware Features
FEATURE
Wireless Functionality
Firmware Upgrade
Configuration Backup &
Restoration
Wireless LAN Scheduler
Time and Date
IP Multicast
Logging
108
DESCRIPTION
Allows IEEE 802.11a and/or IEEE 802.11n wireless clients to connect
to the WAP5605 wirelessly. Enable wireless security (WPA(2)-PSK) and/
or MAC filtering to protect your wireless network.
Note: The WAP5605 may be prone to RF (Radio Frequency)
interference from other 5 GHz devices such as microwave ovens,
wireless phones, Bluetooth enabled devices, and other wireless
LANs.
Download new firmware (when available) from the ZyXEL web site and
use the Web Configurator to put it on the WAP5605.
Note: Only upload firmware for your specific model!
Make a copy of the WAP5605's configuration and put it back on the
WAP5605 later if you decide you want to revert back to an earlier
configuration.
You can schedule the times the wireless LAN is enabled/disabled.
Get the current time and date from an external server when you turn
on your WAP5605. You can also set the time manually. These dates and
times are then used in logs.
IP Multicast is used to send traffic to a specific group of computers. The
WAP5605 supports versions 1 and 2 of IGMP (Internet Group
Management Protocol) used to join multicast groups (see RFC 2236).
Use logs for troubleshooting. You can view logs in the Web
Configurator.
WAP5605 User's Guide