Wireless Security Screen; No Security - ZyXEL Communications WAP5605 User Manual

Table 27 Network > Wireless LAN > General
LABEL
Channel
Selection
Auto
Channel
Selection
Operating
Channel
Apply
Cancel

9.5 Wireless Security Screen

Use this screen to select the wireless security mode for each SSID. Click Network > Wireless LAN
> Security to open the Security screen. The screen varies depending on what you select in the
Security Mode field.

9.5.1 No Security

Select No Security to allow wireless clients to communicate with the access points without any
data encryption.
Note: If you do not enable any wireless security on your WAP5605, your network is
accessible to any wireless networking device that is within range.
Figure 44 Network > Wireless LAN > Security: No Security
The following table describes the labels in this screen.
Table 28 Network > Wireless LAN > Security: No Security
LABEL
SSID
Security Mode
Apply
Cancel
WAP5605 User's Guide
DESCRIPTION
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the frequency
band and the country you are in.
This option is only available if Auto Channel Selection is disabled.
Select the check box to have the WAP5605 automatically scan for and select a channel
which is not used by another device.
This displays the channel the WAP5605 is currently using.
Click Apply to save your changes back to the WAP5605.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select the SSID for which you want to configure the security.
Choose No Security from the drop-down list box.
Click Apply to save your changes back to the WAP5605.
Click Cancel to reload the previous configuration for this screen.
Chapter 9 Wireless LAN
79