ZyXEL Communications WAP5605 User Manual page 45

5.6.1.3 WPA(2)-PSK
Use this screen if the access point to which you want to connect uses WPA(2)-PSK security mode.
Figure 23 Client Mode: WLAN > Profile: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 15 Client Mode: WLAN > Profile: WPA-PSK/WPA2-PSK
LABEL
Wireless Setup
Profile Name
Network Name
(SSID)
Site Survey
Security
Security Mode
Encryption Type
Pre-Shared Key
Apply
Back
WAP5605 User's Guide
DESCRIPTION
Enter a descriptive name for this profile.
Enter the name of the access point to which you are connecting.
Click this button to go to the Site Survey screen and see available wireless
devices within range.
Select WPA-PSK or WPA2-PSK to add strong security on this wireless network.
Select the type of wireless encryption employed by the access point to which you
want to connect.
WPA-PSK or WPA2-PSK uses a simple common password for authentication.
Type the pre-shared key employed by the access point to which you want to
connect.
Click Apply to save your changes back to the WAP5605.
Click Back to go back to the previous screen.
Chapter 5 Client Mode
45