Client Mode Status Screen - ZyXEL Communications WAP5605 User Manual

5.5 Client Mode Status Screen

Click to open the status screen.
Figure 18 Status: Client Mode
The following table describes the labels shown in the Status screen.
Table 10 Status Screen: Client Mode
LABEL
Logout
Device Information
Host Name
Firmware Version
Sys OP Mode
LAN Information
MAC Address
IP Address
IP Subnet Mask
DHCP
WLAN Information
WLAN OP Mode
WAP5605 User's Guide
DESCRIPTION
Click this at any time to exit the Web Configurator.
This is the WAP5605's model name.
This is the firmware version and the date created.
This is the device operating mode
WAP5605 is set - Client Mode.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Client or None.
This is the device operating mode
WAP5605's wireless LAN is set - Client Mode.
Chapter 5 Client Mode
(Section 2.1.2 on page 21) to which the
(Section 2.1.2 on page 21) to which the
39