ZyXEL Communications WAP5605 User Manual page 34

Chapter 4 Access Point Mode
Table 7 Status Screen Icon Key: Access Point Mode (continued)
ICON
The following table describes the labels shown in the Status screen.
Table 8 Status Screen: Access Point Mode
LABEL
Logout
Device Information
Host Name
Firmware Version
Sys OP Mode
LAN Information
MAC Address
IP Address
IP Subnet Mask
Default Gateway
DHCP
WLAN Information
WLAN OP Mode
MAC Address
Status
Name (SSID)
Channel
Operating Channel
Security Mode
802.11 Mode
WPS
Interface Status
Interface
Status
Rate
System Status
34
DESCRIPTION
Click this icon to see the Configuration navigation menu.
Click this icon to see the Maintenance navigation menu.
DESCRIPTION
Click this at any time to exit the Web Configurator.
This is the WAP5605's model name.
This is the firmware version and the date created.
This is the device operating mode
Access Point Mode.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the gateway IP address.
This shows the LAN port's DHCP role - Client or None.
This is the device operating mode
wireless LAN is set - Access Point Mode.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - ON.
This shows a descriptive name used to identify the WAP5605 in the wireless LAN.
This shows the channel number which you select manually or the WAP5605 automatically
scans and selects.
This shows the channel number which the WAP5605 is currently using over the wireless LAN.
This shows the level of wireless security the WAP5605 is using.
This shows the wireless standard.
This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
Click the status to display Network > Wireless LAN > WPS screen.
This displays the WAP5605 port types. The port types are: LAN and WLAN.
For the LAN ports, this field displays Down (line is down) or Up (line is up or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
For the LAN ports, this displays the port speed or N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/
A when the WLAN is disabled.
(Section 2.1.2 on page 21) to which the WAP5605 is set -
(Section 2.1.2 on page 21) to which the WAP5605's
WAP5605 User's Guide