What You Can Do; What You Need To Know; Status Screen - ZyXEL Communications WAP5605 User Manual

Chapter 3 Easy Mode
Click Status to open the following screen.
Figure 5 Easy Mode: Status Screen
Go to
Network
Map
Screen

3.2 What You Can Do

You can do the following in this mode:
• Use this Navigation Panel
• Use the Network Map screen
gateway and whether it is connected to the Internet.
• Use the Control Panel
• Use the Status Screen screen
WAP5605, including the LAN IP, MAC Address of the WAP5605 and the firmware version.

3.3 What You Need to Know

Wireless Security in the control panel is not configurable when the WAP5605 is in client mode.
24
Navigation Panel

Status Screen

Control Panel
(Section 3.4 on page
(Section 3.5 on page
(Section 3.6 on page
(Section 3.7 on page
25) to opt out of the Easy mode.
25) to check if your WAP5605 can ping the
26) to configure wireless security.
30) to view read-only information about the
WAP5605 User's Guide