Cleaning Around The Heads - MUTOH Viper TX Operation Instructions Manual

•
Do not spill water next to the spitting box.
Step 8 :
Place the mesh back into the spitting box.
Step 9 :
Press the ENTER key when done. The carriage will automatically go to its home position.

5.3.6 Cleaning around the heads

When to perform?
Cleaning around the heads must be performed weekly.
•
Only use Mutoh water based textile cleaning liquid.
•
Only use swabs of the Good shape kit.
Step 1 :
Power ON the printer and go to the WiperClean Setup Menu. This will cause the unlocking of the
carriage.
Step 2 :
Open the left maintenance covers by loosening the four screws.
Step 3 :
Slide the carriage slowly into the left maintenance area.
Downloaded From ManualsPrinter.com Manuals
Caution
* WiperClean *
Changed wiper?
Caution
* WiperClean *
Changed wiper?
Viper TX – Operation Instructions
→ ENTER
→ ENTER
77
AP-75710, Rev. 1.1, 09/01/2008