Set 15: Exhaust Fan; Set 16: Longstore; Set 17: Cr Maintenance - MUTOH VJ-1938TX Operation Manual

Set 15: Exhaust Fan

Set 15: Exhaust Fan

Set 16: Longstore

Set 16: Longstore
When performing a Longstore
Remove Cartridges
Note
Be sure to use the dedicated cleaning fluid.

Set 17: CR Maintenance

Set 17: CR Maintenance
Sets up Exhaust fan operation.
Ventilates the inside of the printer to stabilize the parts performance. It also decreases the
contamination by ink mist inside the printer.
We recommend that you use Exhaust fan, especially when printing for a long time.
Setting values
Exhaust Fan : Off
Exhaust Fan : Low
Exhaust Fan : High
Wash Print head with the cleaning fluid.
Submenu
Longstore : Start
Remove Ink cartridge, and install Cleaning cartridge.
「Long-term storage」 P. 132
Performs maintenance.
Used in the following cases.
• Replacing absorption material for the flushing box
• Cleaning of cleaning wiper
• Cleaning of print head circumference
「Maintenance」 P. 102
Submenus
CR Mainte. : Start
CR Mainte. : End
Turn Off Exhaust fan.
Start Exhaust fan at Low.
This is the initially set value.
Start Exhaust fan at High.
Wash Print head with the cleaning fluid.
Press the [Enter] to perform head cleaning.
Performs maintenance.
Completes maintenance.
Perform the pumping operation (start/stop) by
pressing the [ - ] key.

Set 15: Exhaust Fan

85