Mpt Entrance Sensor Actuator (A) (Pl 5.1.19) And Transfer Belt Entrance Sensor Actuator (Pl 5.1.18) - Xerox 7300B - Phaser Color Laser Printer Service Manual
Color printer
Hide thumbs
Also See for 7300B - Phaser Color Laser Printer:
- Study manual (68 pages) ,
- Paper manual (34 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Transfer Belt Entrance Sensor Actuator (PL 5.1.18)
MPT Entrance Sensor Actuator (PL 5.1.19)
1.
Remove the Printer Unit Chassis (see pg. 6-156).
2.
Remove the Registration Entrance Sensor Actuator (see pg. 6-170).
3.
Remove the Entrance Sensor Board (see pg. 6-163).
4.
From the bottom, squeeze the two locking tabs securing the MPT Entrance Sensor
Actuator (item #1) and remove the actuator.
5.
From the bottom, squeeze the two locking tabs securing the Transfer Belt Entrance
Sensor Actuator (item #2) and remove the actuator.
Note:
For reassembly, install the sensor actuator and ensure the
spring arm is properly located in the notch in the Printer
Unit Chassis.
FRU Disassembly
1
2
S7300-65
6-171
Advertisement
Chapters
Table of Contents
Troubleshooting
