Troubleshooting; Error Messages - FP centormail Operator's Manual

16

Troubleshooting

16.1

Error messages

Problem
...
general errors
Blank display
centormail 'behaves
strangely' or does not
seem to react anymore
centormail makes sounds
without any apparent
reason
An error message appears on the display
in case of an error or handling error. In
addition, a beep may also indicate an
error (see Chapter 14.4 on page 96).
Carefully read the error message. You
will be given hints on the error's cause
and what you can do to remedy it.
You can correct many minor errors and
issues occurring during centormail
operation yourself.
Please contact your FP servicing dealer if
you cannot remedy an error by means of
the display information and the hints
given in this Operator Manual.
Possible cause and remedy
Check whether the power cable has been properly
plugged in and the power switch has been engaged.
Software problem.
Switch off centormail. Wait for at least 1 minute, then
switch centormail back on.
The print system and the ink tank may cause sounds
due to pumping and deairing. These are normal
sounds that are related to their function, thus they are
no errors.
151
Troubleshooting