Safety Tips - FP centormail Operator's Manual

8
centormail Operator Manual
1

Safety tips

centormail is a digital mailing system with ink-jet print technology for metering mail.
centormail complies with the pertinent safety regulations for office information equip-
ment.
Please observe the following tips for your own safety:
• Installation and commissioning of the centormail mailing system have to be done
by qualified personnel authorized by FP Mailing Solutions.
• Operate the centormail only on grounded power sockets. Make sure your office
power supply conforms to the power requirements indicated on the serial number
plates.
• Only use the supplied power and connection cables or cables that have been
approved by FP Mailing Solutions. Make sure that cables are not damaged.
• Only use the power supply unit (PSU) supplied with the sealer, or one that has been
approved by FP Mailing Solutions. Make sure that the PSU and its cables are not
damaged.
• Make sure the sockets for connecting the mailing system are close by and easily
accessible at all times.
• Do not reach into the danger areas marked with warning signs.
• Keep long hair, fingers, loose clothing pieces, shawls and jewelry away from mov-
ing machine parts.
• Do not remove any parts of the housing.
• Do not remove any equipment related to safety or protection. Do not make them
inoperative or unable to function. In case of an error (jam or unauthorized interfer-
ence), the safety cap – a small part of the housing located at the letter exit of the
postage meter – is released and the transport stops. You have to bring the safety
cap back into position before you can go on using the centormail. By no means
must you try to block or fasten the safety cap.
• Never cover the ventilation slots of the housing.
• Unplug the plugs prior to cleaning the centormail mailing system.