Moving The Centormail Mailing System To Another Location - FP centormail Operator's Manual

170
centormail Operator Manual
Moving the centormail mailing system to another
location
Warning! When moving the centormail mailing system to another location,
please observe the following tips for your own safety:
• Switch off the centormail mailing system and all components connected to
it prior to dismantling and transporting them.
• The centormail postage meter weighs more than 45 lb / 20 kg.
You are advised to seek the help of another person when moving the
postage meter.
Warning! Potential hazard that may result in injury to the hands! Be very
careful when handling the power sealer. As a consequence of its construction
design, the power sealer has very sharp edges that might hurt you.
Caution! Please observe the following tips to avoid damage to the centormail
mailing system:
• Have the centormail mailing system with dynamic scale moved by FP
Mailing Solutions Service. Improper moving or transport of the dynamic
scale may result in damage to the scale system.
• Empty the sealant tank completely before transporting the sealer.
• Do not use attached parts like the hand feed tray, the protective glass, the
label dispenser, or the weighing platform as 'handles' during transport.
The best way to handle the components is to hold them at the lower part
of the housing at the clearance normally used for the housing connectors.
• Always move the mailing system in a horizontal position.
• We recommend using the original packaging in case you have to move the
centormail or send it to the FP Mailing Solutions Service.
• Once you have brought the mailing system from a cold environment to the
new location: Wait for at least two hours before starting up the mailing
system again. The centormail adapts to the room temperature. Any
condensation evaporates.
This chapter describes how to dismantle and install the centormail mailing
system including all of its optional components. Should a step not apply to
your configuration, just continue with the next step.