Access Control - Master / User; Setting The Letter Catch Tray - FP centormail Operator's Manual

3.3 Access control – MASTER / USER
By means of the MASTER and USER cards, collectively referred to as access cards,
the access rights for using the mailing system are determined.
The card with the inscription MASTER provides unrestricted access to all functions.
The card with the inscription USER only provides access to certain functions:
– metering to the assigned account
– storing and changing memories
– assigning an advert and a text message to the card's account.
Access control by means of access cards can also be completely switched off. Then,
metering is possible to all accounts without having to insert an access card.
You will find an overview of the access rights on page 163.
3.4

Setting the letter catch tray

The catch tray can be adapted to different envelope sizes – up to 10" x 14" (ISO B4 /
250 x 353 mm).
The basics of centormail operation
Inserting an access card
• Insert the access card into the card
reader in the direction of the arrow.
The chip on the card must face the rear.
• Insert the access card into the card
reader, you will feel a slight resistance
before the card is locked into position
and comes to a stop.
Removing the access card
• Simply pull the card out of the card
reader.
• Adjust both catch brackets so that the
metered mail pieces easily slide into
the catch tray and are neatly stacked.
15