Seal Letters Only (Centormail With Sealer) - FP centormail Operator's Manual

68
centormail Operator Manual
7.5 Seal letters only
You can seal letters with the centormail mailing system without metering them.
Imprint offset
The incoming mail stamp default position
is approximately 0.4" (1 cm) from the right
edge of the mail piece. As for regular
meter imprints, you can adjust the imprint
offset of the incoming mail stamp (see
page 39).
Stamping incoming mail
Caution! Only use the 'Incoming Mail
Stamp' function with mail pieces that
comply with the specifications on
page 196.
• Insert the incoming mail with the side to
be stamped facing the rear.
centormail prints the incoming mail
stamp.
(centormail with sealer)
Turning moistening on
• Turn the envelope sealing switch to the
position SEAL.