The Basics Of Centormail Operation; Switching Centormail On / Off - FP centormail Operator's Manual

3

The basics of centormail operation

In this chapter you will learn about the basic functions of the centormail mailing
system and how to handle the user interface.
3.1

Switching centormail on / off

Use the power switch (the toggle switch on the top left side of the postage meter) to
turn the centormail and all installed optional components ON or OFF.
The basics of centormail operation
Caution! Wait for at least one minute
between switching off and back on.
Switch on
• Push the power switch to
position.
The display illumination turns on and a
start routine is initialized. centormail
checks and activates all components.
If your system features an ink tank
system, you will hear distinct sounds from
its pump.
When the start routine is completed, the
home menu is displayed. centormail is
now ready for operation with the following
settings for metering:
– The postage value (and the
endorsement imprint if applicable)
are reset to default values, as stored in
memory 1.
MEM
– Current date.
– The advert and the text message are
determined by the current account.
– An account is selected if either an
access card has been plugged in
(MASTER / USER), or if access control
has been disabled.
13
I
(ON)