FP centormail Operator's Manual page 182

182
centormail Operator Manual
Connect the power sealer to the postage meter
Key holes
Warning! Potential hazard that may
result in injury to the hands! Be very
careful when handling the power sealer.
As a consequence of its construction
design, the power sealer has very sharp
edges that might hurt you.
• Position the power sealer on the con-
nector while inserting the two pegs of
the power sealer into the key holes of
the right side wall of the postage meter.
• Push the power sealer down as far as it
goes. Make sure that the letter guide
face (blue) of both the postage meter
and the power sealer are flush at the
upper side.
• Insert the connection cable of the
power sealer into the 9-pin interface on
the right side wall of the postage meter
and tighten screws.