FP centormail Operator's Manual page 131

• Pull both lifters (blue-green) upwards.
The print heads are lifted from their brack-
ets.
• Pull both print heads upward out of the
bracket.
• Confirm the completion of each step
with C .
ONTINUE
Inserting new print heads
Caution! Insert the print heads only after
they have adapted to the ambient tem-
perature of the postage meter (e.g. after
storage in the basement or after transport
in a cold vehicle). Else, no correct calibra-
tion can be performed.
• Unpack the new print heads.
• Remove the protective strip from the
print heads.
Maintenance and care
131