FP centormail Operator's Manual page 141

Manually cleaning the ink cartridges / print heads
Caution! Improper cleaning may damage the ink cartridges / print heads or
render them unusable. Heed the following tips to avoid damage to the print
system:
• If you encounter imprint quality issues, always perform one of the system
cleaning functions available from the M
Chapter 15.6 on page 140.
• You should only clean the ink cartridges / print heads manually in excep-
tional cases, when automatic cleaning fails to restore the normal print
quality.
• Only use a soft, fiberless cloth that is moistened with de-ionized water for
cleaning. Small fibers might clog the nozzles. A cloth that is dry or not soft
enough may cause scratches. Such scratches make the cartridge / print
head become unusable, because they prevent the ink jet from being
correctly positioned during printing.
• Do not use chemical cleaning agents.
Printing
Change ink cartridge / printheads
centormail 140:
Change printhead
first. Please refer to
ENU
Moving the ink cartridges / print heads
into the changing position
• Press the
• Select P
RINTING
/
TRIDGE PRINTHEADS
.
HEAD
The exchange procedure starts.
Removing the cartridges / print heads
Caution! Swapped cartridges / print
heads may cause print system errors.
When cleaning, you are advised to only
remove one cartridge / print head at a
time. Thus, you cannot accidentally swap
them on re-insertion.
• Open the print system flap by pressing
the release key.
Maintenance and care
key.
C -
HANGE INK CAR
C
HANGE PRINT
141
-