Rate Tables (Centormail With Static / Dynamic Scale); 14.17.1 Updating The Rate Table - FP centormail Operator's Manual

114
centormail Operator Manual
14.17 Rate tables
centormail can store up to 2 rate tables. centormail automatically checks that the rate
table is valid.

14.17.1 Updating the rate table

You must update the rate table for postage rate calculation if postage regulations or
rates have changed. centormail supports loading of rate tables from chip card. Order
the new rate table from FP Mailing Solutions.
Load Data from Card
Insert data card with rate table
(centormail with static / dynamic scale)
• Press the
• Select L
• Remove the access card and insert the
• Confirm the security prompt by
centormail now loads the rate table that is
stored on the card.
• Carefully read all displayed information
Upon activation of a new rate table, the
memory keys will be erased and re-
programmed.
In the future, rate tables will automatically
be updated during TELESET. Until this
feature is implemented, new rate tables
have to be loaded into centormail via chip
card.
key.
D
OAD ATA FROM
data card containing the rate table.
pressing Y .
ES
and follow the instructions.
C .
ARD