Zeroing Static Scale (Centormail With Static Scale); Set Gravitation (Centormail With Static / Dynamic Scale) - FP centormail Operator's Manual

118
centormail Operator Manual
14.18 Zeroing static scale
The static scale is automatically zeroed if deviations from the zero point are detected.
This is indicated by a pop up message. If you wish to weigh with a pre-load (e.g. when
using an extra scale pan), you have to zero the scale.
14.19 Set gravitation
To determine the weight, the scale measures the gravity between the earth and the
object on the weighing platform. This force depends on the latitude and the distance
from the geocenter. Therefore, you have to set the location of your mailing system
with scale for exact weight display.
Select location (state)
Scale
Zero Adjust
(centormail with static / dynamic scale)
Scale
Set Gravitation
Change
Save
(centormail with static scale)
• Press the
• Select S
CALE
For a few seconds, a pop up message
informs you about the process. As soon
as the message disappears, the scale
has been zeroed.
• Press the
• Press S
CALE
C .
HANGE
A list of all federal states is displayed.
• Select the location of your mailing
system.
• S the displayed setting.
AVE
key.
Z A .
ERO DJUST
key.
S G
ET RAVITATION