Modem - Changing The Dialing Parameters - FP centormail Operator's Manual

14.8 Modem – changing the dialing parameters
On commissioning, FP Mailing Solutions Service will set the correct dialing
parameters for the built-in modem. You should check and – if need be – correct the
modem settings if changes were made to your phone line.
System Settings
Modem
Direct Line / Extension
Continue
Save
Modem settings and their meaning:
Connection D
type
E
Access E
method
(only on extension)
H
L
IRECT INE
XTENSION
D
XCHANGE IGIT
F
OOK LASH
Advanced settings & system information
• Press the
• Select S S
YSTEM
centormail opens the adjustment
procedure for the dialing parameters.
• Follow the instructions in the display.
centormail will ask for:
– type of phone line
– access method (where applicable)
– exchange digit (where applicable).
Finally, centormail displays a summary of
the selected parameters.
• If the displayed configuration is correct:
S .
AVE
The following table lists and explains the
possible modem settings.
centormail is connected to a main
exchange line.
centormail is connected to an extension
(of a telephone system).
Defines how the exchange is dialed from
the extension.
Usually you would dial E
For use in a Hook Flash application.
key.
M
ETTINGS ODEM
D
XCHANGE IGIT
103
.
.