Checking Engine Start System - Kubota RTV-X900 Operator's Manual

60 PERIODIC SERVICE
(1) Differential lock pedal (spray type grease)
(1) Front A-ARM (Grease fitting)
(1) Rear A-ARM (Grease fitting)
(2) Parking brake link (spray type grease)
BChecking Engine Start System
To avoid serious injury:
A Do not allow anyone near the vehicle while
A If the vehicle does not pass the test do not
C Preparation before testing.
1. Place all control levers in the "NEUTRAL" position.
2. Set the parking brake and stop the engine.
C Test: Range gear shift lever safety switch
1. Sit on the operator's seat.
2. Shift the range gear shift lever to H position.
3. Return the Speed control pedal to the "NEUTRAL"
position.
4. Shift the hydraulic lift cylinder lever to the "NEUTRAL"
position.
5. Turn the key to "START" position.
6. The engine must not crank.
7. Repeat the step 2 to 6 with the range gear shift lever
at "L" and "R" each position.
8. If it cranks, consult your local KUBOTA Dealer for
service.
(1) Range gear shift lever
(2) Speed control pedal
(A) Left rear tire
testing.
operate the vehicle.