12
OPERATING THE ENGINE
4. Lock the hydraulic lift cylinder lever or
the hydraulic outlet lever to the
"NEUTRAL" position with a restricting
plate (if equipped).
(1) Hydraulic lift cylinder lever (if equipped) or
Hydraulic outlet lever (if equipped)
(2) Restricting plate (if equipped)
5. Push the speed control pedal down
(1) Speed control pedal
(A) "LOCK"
6. Insert the key into the key switch and
(
) "OFF" (Engine-Stop)
(
) "ON" (Engine-Run)
ON........ A All the accessories can be used while the
about 1/2 way.
(A) "INCREASE"
(B) "DECREASE"
turn it "ON".
(
(
engine is stopped.
A Do not leave the key at "ON" position.
The battery will be quickly discharged.
Turn it back to the "OFF" position after
use.
) "GLOW" (Preheat)
) "START" (Engine-Start)