Glove Box (Std.) And Glove Box Cover (If Equipped); Operating Techniques; Differential Lock - Kubota RTV-X900 Operator's Manual

26 OPERATING THE VEHICLE
BGlove Box (Std.) and Glove Box Cover (if
equipped)
Insert the key into the knob slot and turn it
counterclockwise to lock.
Insert the key into the knob slot and turn it clockwise to
unlock.
(1) Glove box
(2) Glove box cover (if equipped)
(3) Knob (if equipped)
(A) "LOCK"

OPERATING TECHNIQUES

BDifferential Lock
To avoid serious injury due to loss of steering
control:
A Do not operate the vehicle at high speed with
differential lock engaged.
A Do not attempt to turn with the differential lock
engaged.
A Be sure to release the differential lock before
making a turn in field conditions.
If one of the rear wheels should slip, step on the
differential lock pedal. Both wheels will then turn together,
reducing slippage.
Differential lock is maintained while the pedal is
depressed or may be held by using differential lock holder.
(1) Differential lock pedal
(2) Differential lock holder
C Handling the retaining device for differential lock
1. Pull the differential lock holder up while the differential
lock pedal is depressed.
2. Release the pedal before your hand leaves the
differential lock holder.
The differential lock is then maintained even if your
foot leaves the pedal.
3. The lock is released when the foot pedal is depressed
again.
A When using the differential lock, always slow the
vehicle and engine down.
A To prevent damage to power train, do not engage
differential lock when one wheel is spinning and the
other is completely stopped.
(A) Depress to "ENGAGE"
(B) Release to "DISENGAGE"