Checking Brake Pedal; Checking Parking Brake; Checking Easy Checker(Tm); Checking Head Light, Turn Signal Light (If Equipped) Etc - Kubota RTV-X900 Operator's Manual

56 PERIODIC SERVICE
BChecking Brake Pedal
To avoid serious injury:
A Stop the engine and chock the wheels before

checking brake pedal.

1. Inspect the brake pedals for free travel, and smooth
operation.
2. Adjust if incorrect measurement is found: (See
"Checking Brake Pedal" in "EVERY 200 HOURS" in
"PERIODIC SERVICE" section.)
(1) Brake pedal (A) "FREE TRAVEL"
(B) "PEDAL STROKE"
BChecking Parking Brake
Pull the parking brake lever to apply the brakes. With the
key switch at "ON" position, the parking brake indicator on
the instrument panel lights up. To release the brakes,
push in the button at the side of the parking brake lever
and tilt the lever forward.
A Make sure the parking brake warning lamp
Easy Checker(TM) goes off when parking brake lever
is forward.
(1) Parking brake lever
(2) Release button
BChecking Easy Checker(TM)
1. Inspect the instrument panel for broken Easy
Checker(TM) lamps.
2. Consult your local KUBOTA Dealer if broken.
BChecking Head Light, Turn Signal Light (if
equipped) etc.
1. Inspect the lights for broken bulbs and lenses.
2. Replace if broken.
BChecking Seat Belt and ROPS
1. Always check condition of the seat belts before
operating the vehicle.
2. Replace if damaged.
on the
(A) "PULL"
(B) "RELEASE"