Cleaning Oil Cooler Net; Checking Brake Fluid Level - Kubota RTV-X900 Operator's Manual

BCleaning Oil Cooler Net
To avoid serious injury:
A Allow oil cooler or oil line parts to cool down
sufficiently, they can be hot and can cause
injury.
1. Park the vehicle on a flat surface.
2. Stop the engine.
3. Open the seats and remove the utility box and
maintenance cover.
4. Detach the oil cooler net and remove all trash.
(1) Oil cooler net (A) "DETACH"
BChecking Brake Fluid Level
To avoid serious injury:
A Never operate the vehicle, if the brake fluid is
below the "MIN" mark.
A Use only KUBOTA DOT3 GENUINE BRAKE
FLUID from a sealed container. Using other
type of oil ruins synthetic resin or rubber
installed in brake system components, and
may cause brake failure.
A Avoid contamination of the brake fluid.
Thoroughly clean area around the filler cap
before removing. Do not open the brake fluid
reservoir cap unless absolutely necessary.
A Use extreme care when filling the reservoir. If
brake fluid is spilled on the power steering
hose, wash off with water immediately. Brake
fluid quickly ruins synthetic resin or rubber
hoses.
1. Park the vehicle on a level surface.
2. Open the hood.
3. Check to see that the brake fluid level is between the
"MAX" and "MIN" marks.
4. If it is below the "MIN" mark, add brake fluid to the
"MAX" mark.
(1) Oil tank
PERIODIC SERVICE
(A) "MAX"
(B) "MIN"
55