CHECKS BEFORE STARTING THE MACHINE
(1) Warning indicator (red)
(2) Warning message
7.1 Overheat warning
1. If the coolant temperature becomes elevated, the
coolant-temperature-warning-indicator blinks and
the warning message (
as long as the temperature remains elevated.
2. If the coolant temperature further increases, the
coolant-temperature-warning-indicator lights up, the
engine-warning-indicator blinks, and the warning
message (
) appears on LCD as long as
"E:9115"
the coolant temperature remains elevated.
Operate the machine only with reduced loads until the
operating temperature is normal again.
38
(A) Blinking
) appears on LCD
"E:9114"
CHECKS FOR THE INDICATORS
(1) Coolant temperature warning
indicator
(2) Engine warning indicator
(3) Warning message
CHECKS FOR THE SAFETY
LEVERS AND THE APPLIANCE
1. Safety key start system
Safety-key-start-system is the safety system to prevent
the machine from moving suddenly.
Set the parking-brake-switch to the parking position
and the shuttle-change-lever to the neutral position
before stopping the engine.
The safety-key-start-system does not allow the engine
to start when the parking-brake-switch is out of the
parking position, and the shuttle-change-lever and
auxiliary-control-lever are out of the neutral position.
2. Lift arm support
The lift-arm-support prevents the loader-lift-arms from
falling when servicing the machine.
(1) Lift arm support device
2.1 Installing the lift arm support
WARNING
To avoid personal injury or death:
(A) Blinking
(B) Lighting
R430