Checking Engine Start System - Kubota RTV-X900G Operator's Manual

BChecking Engine Start System
To avoid serious injury:
A Do not allow anyone near the vehicle while
testing.
A If the vehicle does not pass the test do not
operate the vehicle.
C Preparation before testing.
1. Place all control levers in the "NEUTRAL" position.
2. Set the parking brake and stop the engine.
C Test: Range gear shift lever safety switch
1. Sit on the operator's seat.
2. Shift the range gear shift lever to H position.
3. Return the Speed control pedal to the "NEUTRAL"
position.
4. Shift the hydraulic lift cylinder lever to the "NEUTRAL"
position.
5. Turn the key to "START" position.
6. The engine must not crank.
7. Repeat the step 2 to 6 with the range gear shift lever
at "L" and "R" each position.
8. If it cranks, consult your local KUBOTA Dealer for
service.
(1) Range gear shift lever
(2) Speed control pedal
PERIODIC SERVICE
(1) Hydraulic lift cylinder lever
73