Setting The Outgoing Fax Or Station Name And Number; Setting The Date And Time - Lexmark MX310 User Manual

Faxing

Setting the outgoing fax or station name and number

1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Fax Settings > Analog Fax Setup.
3
From the Fax Settings menu, type the name to be printed on all outgoing faxes in the Fax Name or Station
Name field.
4
In the Fax Number or Station Number field, enter the printer fax number.
5
Click Submit.

Setting the date and time

You can set the date and time so that they are printed on every fax you send. If there is a power failure, then
you may have to reset the date and time.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Other Settings area > Security > Set Date and Time.
3
In the Set Date & Time field, enter the current date and time.
4
Click Submit.
Note: We recommend using the network time.
Configuring the printer to observe daylight saving time
Set the printer to automatically adjust for daylight saving time.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Security > Set Date and Time.
3
Select the Automatically Observe DST check box, and then enter the DST start and end dates in the Custom
Time Zone Setup section.
4
Click Submit.
82