Security; Ati Access Levels - Paradyne HotWire 7974 User Manual

Security

ATI Access Levels

8-2
The Hotwire 79xx Standalone Termination Unit has two access levels:
Administrator and Operator. The access level determines what functions are
accessible, as shown in Table 8-1.
Table 8-1. Access Levels
ATI Access to Menu Functions
Status
Test
Configuration
Control
Access levels can be applied to Login IDs, the COM port, and Telnet sessions.
The effective access level is always the most restrictive:
H
When access is through the COM port and a login is required on the COM
port, the effective access level is the more restrictive of the COM port access
level or the login access level. (See Table A-6,
H
When access is through Telnet and a login is required for Telnet, the effective
access level is the more restrictive of the Telnet session access level or the
login access level. (See Table A-7,
When an access level of Operator is applied to the COM port and to Telnet
sessions, a Login ID with Administrator authority is effectively reduced to
Operator. It is no longer possible to change configuration options, and full access
can be restored only by reloading factory defaults. (See
Port or Factory Defaults
August 1999
Administrator
Read-Only
Full Access
Full Access
Full Access
Telnet Session
on page 8-6.)
Operator
Read-Only
No Access
Read-Only
No Access
Communication Port Options.)
Options.)
Resetting the Unit's COM
7970-A2-GB20-00