To Set A Paper Size In Metric Measurements; To Set A Non-Standard (Custom) Paper Size - Konica Minolta 8020 User Manual

3.5 Loading Paper

To set a paper size in metric measurements

1
Touch [Paper].
A screen that shows the specified paper size settings appears.
2
Select the 1st drawer, and then touch [Size Change].
3
Touch [Metric].
The Input screen appears with paper sizes in metric measurements.
4
Select the setting for the size of paper that is
loaded.
5
Touch [Enter].
The paper size for the 1st drawer is set.

To set a non-standard (custom) paper size

 If non-standard-sized paper is loaded, it will be necessary to enter the paper size.
1
Touch [Paper].
A screen that shows the specified paper size settings appears.
2
Select the 1st drawer, and then touch [Size Change].
3
Touch [Custom Size].
The Custom Size screen appears.
4
Make sure that
5
Touch and
side X for the paper that is loaded.
H
Touch until the cursor moves below
the fraction that you wish to change.
The entered length of side X appears.
6
Touch .
7
Touch and
H
Touch until the cursor moves below the fraction that you wish to change.
The entered length of side Y appears.
8
Touch [Enter], and then touch [Enter] in the Input screen.
9
The paper size for the 1st drawer is set.
Konica 8020/8031
is selected.
to select the length of
to select the length of side Y for the paper that is loaded.
3
3-13