Assigning Passwords - Extron electronics IP LINK IPL T PCS4 User Manual

Assigning passwords

The Passwords screen allows you to assign passwords to the administrator and user access
levels. The administrator password gives access to all IPL T PCS4 web pages, enabling the
administrator to configure the PCS4.
The user password provides access only to the System Status web page. If you are logged in
as user, you see only the Status
configuration changes.
To assign passwords:
1.
On the Configuration page, select
2. Enter the new administrator password in the
NOTE:
Passwords must contain 4 to 12 alphanumeric characters. Symbols and
spaces are not allowed, and the passwords are case sensitive.
3.
In the
Re-enter Admin Password
4.
If you want to assign a user password, enter it in the
NOTE:
You cannot assign a User password unless an administrator password has
either been assigned or is being assigned at the same time.
5.
Reenter the same user password in the
Figure 15.
Passwords Screen with Administrator and User Passwords Entered
6.
Click to set the passwords.
Submit
Removing passwords
To remove a password:
1.
On the Configuration page, select
2. In the
Administrator Password
characters that are there, and press the <Spacebar> on your computer keyboard to
enter a space.
3. Repeat step 2 in the
Re-enter Admin Password
both fields.
4. Click .
Submit
NOTE:
Deleting the administrator password also deletes the user password.
tab with the System Status screen. You cannot make any
Passwords from the side-bar menu.
Administrator Password
field, enter the same password again to confirm it.
User Password
Re-enter User Password
Passwords from the sidebar menu.
, the , or both fields, delete the
User Password
, the
Re-enter User Password
IPL T PCS4 • HTML Configuration and Control
field.
field.
field.
, or
25