Configure This Device Panel; Passwords Panel - Extron electronics SW HD 4K PLUS Series User Manual

Configure This Device Panel

This panel enables you to download PCS which enables you to configure the
SW HD 4K PLUS series switcher. Click the
open the Download page of the Extron website (see
page 34 for further instruction).

Passwords Panel

NOTE: The factory configured passwords for all accounts on this device have been set
to the device serial number. In the event of an absolute system reset, the passwords
convert ot the default, which is no password.
The Passwords panel (see figure 22,
administrator or user passwords. To assign passwords, click the
Passwords panel. The Passwords dialog box opens.
Figure 28.
To assign an administrator password:
1. In the
2. In the
the same password from the field above.
3. Click the
To assign a user password:
1. Ensure an administrator password is assigned.
2.
In the
3. In the
password from the field above.
4. Click the
To remove a password:
1. In either the
password, leaving the field blank.
2. In the corresponding
3. Click the
To cancel pending changes:
Click the
Cancel
Passwords Dialog Box
Administrator Password
field directly under the
Confirm Password
button. The dialog box closes.
Apply
field, enter the new password.
User Password
field directly under the
Confirm Password
button. The dialog box closes.
Apply
Administrator Password
Confirm Password
button. The dialog box closes.
Apply
button. The dialog box closes.
http://www.extron.com/download/
Downloading and Installing PCS
on page 39) provides an option to set
5
Set
field, enter the new password.
Administrator Password
User Password
or field, delete any existing
User Password
field, press the <Space> key.
SW HD 4K PLUS Series • Internal Web Page
link to
on
button in the
field, enter
field, enter the same
43