Setting up the computer for IP communication
Follow these steps to set up communication between your computer and the PCS4.
NOTE:
The procedure and illustrations in this section are for Windows XP. For other
Windows versions, the screens may appear slightly different.
1.
Open the Network Connections page as follows:
a.
From the
Start
menu, select
b.
From the
Network Tasks
2.
Right-click
Local Area Connection
3.
Select
Internet Protocol (TCP/IP)
is not on the list, it must be added (installed). See your Windows
Protocol (TCP/IP)
user manual or the Windows online help system for information on how to install the
TCP/IP protocol.
My Network Places
.
left side-bar menu, select
View Network connections
, then select
Properties
, and click the
Properties
IPL T PCS4 • HTML Configuration and Control
.
from the pop-up menu.
button. If
Internet
18