Extron electronics IP LINK IPL T PCS4 User Manual page 53

X3$ Daylight saving time (DST) is a 1-hour offset to reflect the time during which clocks are set one hour or more ahead of
=
local standard time, to provide more daylight at the end of the working day. Supported for the U. S. and parts of Brazil
and Europe.
Example: Time in California is GMT -8:00 from March to November and GMT -7:00 from November to March. DST
should be turned off in Hawaii, American Samoa, Guam, Puerto Rico, the Virgin Islands, the eastern time zone portion
of the state of Indiana, and the state of Arizona (excluding the Navajo Nation).
0 = off or ignore
1 = U. S.
2 = Europe
3 = Brazil
X4!
= Reading password. Responds with four asterisks (****) in place of the password, if a password exists. Responds with
an empty space if no password exists.
X4%
= E-mail event number (1 - 64)
X4^ E-mail recipient address (for example, JDoe@extron.com) for the person to whom messages will be sent.
=
X4& = Name (numeral) of e-mail file to be sent; for example: 1.eml, 2.eml, ... 64.eml
X4(
= Default name: a combination of the model name and the last three pairs of the interface MAC address
(for example: IPL-T-PCS4-00-02-3D).
X5@
= Connection security level
11 = user
12 = administrator
X6# Pulse time in 20 ms per count. If this parameter is missing or = 0, then pulse length = default (25 = 500 ms).
=
35565 ms = max. pulse time.
X6&
= Threshold settings for all ports
0 = None
1 = Full
2 = Both (Full and Standby thresholds)
X6( = (Ethernet only) Number of seconds before timeout on IP connections (min. = 1, max. = 6500, and
default = 30 = 300 seconds).
If no data is received during the timeout period, the Ethernet connection is closed. Each step is 10 seconds. The
response is returned with leading zeros.
X7)
= The number (as an optional parameter) that is inserted into the e-mail message if the .eml file has an embedded
command (with no parameters).
X70!
= Condition that is monitored
0 = receptacle off
1 = receptacle on
2 = reference: None
3 = reference: Standby
4 = reference: Full
5 = any change
X70@ Use alarm relay
=
0 = no or disable
1 = yes or enable
X70#
= E-mail to use 61-64
X70$
= Enable and disable monitoring
0 = disable monitoring
1 = enable monitoring
2 = enable with e-mail
X70%
= Alarm status
0 = inactive
1 = active
2 = silenced
IPL T PCS4 • SIS Programming and Control 47