Table of Contents
Advertisement
Passwords Panel
NOTE: The factory configured passwords for all accounts on this device have been set
to the device serial number. Passwords are case sensitive. In the event of an absolute
system reset, these passwords are reset to the default password, which is extron.
To set admin and optional user passwords on the UCS, click the down arrow to the right of
Passwords to display the settings.
NOTE: The following rules apply to passwords:
•
Length is 1-128 characters.
•
All human-readable characters are permitted except | .
•
A default administrator password (admin) is preassigned.
•
The administrator password can be changed, but it cannot be removed. A user
password can be deleted by entering a single space as the password.
Assigning an administrator password
In the Passwords panel, click
1.
Figure 34.
2.
In the Admin Password field (see figure 34,
The password appears as masked characters. To see the actual characters, select the
Show Password
3.
In the Confirm Admin Password field (
Password
4.
Click the blue
available.)
The UCS 303 web page closes and the login page is displayed.
5.
Enter the username (the default is
web page.
Assigning a user password (optional)
1.
To assign a user password, click
Repeat steps 2 through 4 in the User panel.
2.
. The password settings are displayed.
EDIT
Passwords Panel
checkbox.
field.
button (
). (You may need to click this button again to make it
CREATE
3
Admin
EDIT
), enter the new administrator password.
1
), reenter the password from the
2
) and the new password to access the UCS 303
) in the User Password panel.
(
4
UCS 303 • Internal Web Page
Admin
59
Advertisement
Table of Contents
