Table of Contents
Advertisement
A/V Device Power Control
Power control of A/V devices may be accomplished once the PCS4 interface has been
connected and configured. These include web pages and Telnet.
Custom Web Pages
These pages can either be modified versions of the existing web pages, or new web pages
developed in the field.
Web page development can be done with a web site development tool such as FrontPage
or Dreamweaver. Custom web pages can be loaded using the embedded File Management
web page (see
Accessing and Using Telnet (Port 23)
Telnet, short for Telecommunications Network, provides a way for you to connect to a
computer or server (in this case, the PCS4 interface) on a network. Once connected via
Telnet, you can send ASCII serial commands (see the
SIS
the PCS4 settings.
1.
2.
"File
Management," earlier in this section).
Commands" in the "SIS Programming and Control" section) to configure and monitor
Click
, then
, then enter
Start
Run
figure 32, below).
Figure 32.
Telnet Command Prompt
At the command prompt, enter
"Command and Response Table for
and click
. The Telnet program starts (see
Telnet,
OK
.
open
IPL T PCS4 • HTML Configuration and Control
39
Advertisement
Table of Contents
