Status Menu
Table 7-2
Status Messages on the Cisco Unified IP Phone 7906G and 7911G (continued)
Message
TFTP timeout
Timed Out
Version error
XmlDefault.cnf.xml,
or .cnf.xml
corresponding to the
phone device name
Network Statistics Screen
Step 1
Step 2
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
7-14
Chapter 7
Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Description
TFTP server did not respond.
Supplicant attempted 802.1X
transaction but timed out to
due the absence of an
authenticator.
The name of the phone load
file is incorrect.
Name of the configuration file. None. This is an informational message
The Network Statistics screen displays information about the phone and network
performance.
To display the Network Statistics screen, follow these steps:
Procedure
Press the Applications Menu button.
Select Settings.
Possible Explanation and Action
Network is busy—The errors should
•
resolve themselves when the network
load reduces.
No network connectivity between the
•
TFTP server and the phone—Verify the
network connections.
TFTP server is down—Check
•
configuration of TFTP server.
Authentication typically times out if 802.1X
is not configured on the switch.
For more information, see the
Authentication and Status" section on
page
4-36.
Make sure that the phone load file has the
correct name.
indicating the name of the configuration file
for the phone.
"802.1X
OL-11515-01