Hardware And Command Interface; Hardware Interface - Symbol MC3504 User Manual

2 G e t t i n g S t a r t e d

Hardware and command interface

Hardware and command interface
This section describes basic hardware procedures in using your MC35. Information on
the device's command interface is also discussed.

Hardware interface

Using the touch screen backlight button
Under some lighting conditions, viewing the information on your device may be difficult. If
this is the case, activate the backlight by tapping on the screen or pressing the Backlight
button on the QWERTY keypad to illuminate the touch screen.
Using the stylus
On your device, the stylus replaces the mouse.
• Tap - Touch the screen once with the stylus to open items and select
options.
• Drag - Hold the stylus on the screen and drag across the screen to select
text and images. Drag in a list to select multiple items.
• Tap and hold - Tap and hold the stylus on an item to see a list of actions
available for that item. In the pop-up menu that appears, tap the action you
want to perform.
Using the SD/MMC slot
Your device has an expansion slot compatible with a range of SD and MMC storage
cards, which are primarily used to back up or transfer files and data. The slot also
supports SDIO cards for added connectivity options.
To insert a storage card:
NOTE: This device comes with a protective piece in the card slot. Remove the plastic card from the
slot before trying to insert an SD, MMC or SDIO card.
1 Hold your device securely, then lift the rubber cover from the SD/MMC slot.
18