Table of Contents
Advertisement
NTC-6200-03 and NTC-6200-13 models
NO.
ITEM
1
Main antenna socket
2
Aux antenna socket
3
Two-way terminal block connector
4
Reset button
5
SIM card slot
6
SIM tray eject button
7
Torx screw hole
8
RJ45 Ethernet port
9
Mini USB 2.0 OTG port
10
Serial port
NetComm Wireless 3G M2M Router / Plus
12
2
9
7
3
5
6
Figure 5 - Interfaces NTC-6200-03 and NTC-6200-13 models
SMA female connector for main antenna.
SMA female connector for auxiliary antenna (receive diversity).
Connect power source wires here. Power wires may be terminated on the supplied terminal block and
connected to a power source. Refer to the diagram and table under the
wiring of the terminal block. Operates in the 8-40V DC range.
Press and hold for less than 5 seconds to reboot to normal mode.
Press and hold for 5 to 15 seconds to reboot to recovery mode.
Press and hold for 15 to 20 seconds to reset the router to factory default settings.
Insert SIM card here.
Press to eject the SIM tray
If desired, place the SIM tray cover over the SIM card slot and fix it to the router's body using the included
Torx screw.
Connect one or several devices via a network switch here.
Provides connectivity for optional external storage or a USB Ethernet dongle. Supplies up to 0.5A to
connected device.
Female DE-9 port supporting 9-wire RS-232, RS-485 or RS-422 (software selectable).
Table 7 – Interfaces NTC-6200-03 and NTC-6200-13 models
10
1
4
8
DESCRIPTION
Installation
section for correct
www.netcommwireless.com
Advertisement
Table of Contents
