Table of Contents
Advertisement
Destination configuration
The Destination configuration screen displays a list of the destination "profiles" that have been configured on the device as well as
providing the option to add new profiles.
To add a new destination profile:
1.
Click the +Add button at the top right corner of the window. The Event destination edit screen is displayed.
2.
In the Destination name field enter a name for the destination profile then enter the contact details for the each type of
destination i.e. Email address, TCP address and port, UDP address and port and/or SMS number.
3.
Click the Save button when you have entered the required details.
To edit a destination profile:
1.
From the Event destination list, click the edit button for the corresponding destination profile. The Event destination edit
page is displayed. Make the required changes.
2.
Click the Save button.
To delete a destination profile:
1.
From the Event destination list, select the delete button for the corresponding destination profile that you would like to
delete. If the destination profile is linked to an event notification type, the i button is displayed instead of the delete button.
In this case, you must go to the Notification configuration screen and remove the check marks from all the notification
types for each event for which the destination profile is configured. When you have done that, return to the Event
destination list and select the delete button.
2.
Click the Save button.
www.netcommwireless.com
Figure 99 - Event destination list
NetComm Wireless 3G M2M Router / Plus
87
Advertisement
Table of Contents
