NetComm NTC-6200 Series User Manual page 24

ITEM
Data connection
Transparent Bridge (PPPoE)
Profile name list
Default
Status
APN
Username
Roaming settings
Allow data roaming
Connecting to the mobile broadband network
The router supports the configuration of up to six APN profiles; these profiles allow you to configure the settings that the router will
use to connect to the 2G/3G network and switch easily between different connection settings.
For advanced networking purposes, you may activate a maximum of two profiles simultaneously (dependant on network support).
When activating two connection profiles, you should avoid selecting two profiles with the same APN as this can cause only one
profile to connect. Similarly, activating two profiles which are both configured to automatically determine an APN can cause a
conflict and result in neither profile establishing a connection. We recommend that the two active connection profiles have differing,
manually configured APNs to avoid connection issues and ensure smooth operation.
Manually configuring a connection profile
To manually configure a connection profile:
1. Click the Edit button corresponding to the Profile that you wish to modify. The data connection profile settings page is
displayed.
NetComm Wireless 3G M2M Router / Plus
24
Toggles the transparent bridge function on and off.
Sets the corresponding profile to be the default gateway for all outbound traffic except traffic for which there are
configured static route rules or profile routing settings.
Toggles the corresponding profile on and off. If your carrier supports it, two profiles may be turned on simultaneously.
The APN configured for the corresponding profile.
The username used to log on to the corresponding APN.
When set to ON, the router will allow local devices to access the Wireless WAN network when the it is roaming onto a
foreign network. When set to OFF, the router will deny network access to data services when roaming onto a foreign
network. This setting is OFF by default.
Table 15 - Data connection item details
Figure 18 - Data connection profile settings
DEFINITION
www.netcommwireless.com