Data Stream Manager - NetComm NTC-6200 Series User Manual

Data stream manager

The data stream manager provides you with the ability to create mappings between two endpoints on the router. These endpoints
may be physical or virtual, for example, a serial port connected to the router's USB port could be configured as an endpoint or you
could configure a TCP Server as an endpoint. You can then configure a virtual data tunnel or "stream" between the endpoints.
The data stream manager provides a wide range of possibilities and expands upon simple PAD functionality to include the
forwarding and translation of data between any of the endpoints. For example, you could send the GPS data from the built-in
module to a TCP server running on the router. In each case, the logical flow of the stream is from Endpoint A to Endpoint B.
Customers interested in developing their own applications to create custom endpoints and streams can contact NetComm Wireless
about our Software Development Kit.
Endpoints
The first thing to be done in order to create a data stream is to define the endpoints. There are 10 types of endpoint that may be
configured:
Serial port (generic)
TCP Server
TCP Client
UDP Server
UDP Client
GPS Data (for devices with GPS receiver)
User defined executable
RS232 port
RS485 port
RS422 port
www.netcommwireless.com
Figure 74 - Endpoints list
NetComm Wireless 3G M2M Router / Plus
67