NetComm NTC-6200 Series User Manual page 75

PADD
PAD Daemon is a tool used to encapsulate raw serial data into a TCP packet to be transported over IP to another end point. The
server receiving the TCP packets unpacks the data and the original raw serial data is passed out of its serial port to the attached
device, thereby creating an invisible IP network to the two serial devices.
The PAD Daemon runs as a background process which can be accessed via the web configuration interface. The PADD
configuration page is located under "Services > Legacy data managers > PADD". The PADD is used usually with multiple
connections or when redundant connections are needed. The PADD has two modes: the PADD TCP/IP Server mode and PADD
TCP/IP Client Mode. When PADD is enabled, both the PADD server mode and PADD client mode can be run at the same time.
The PADD configuration page is shown below.
Figure 90 – PADD
www.netcommwireless.com NetComm Wireless 3G M2M Router / Plus
75